Vette Homepage

Vet0601a3 Lazarus09 Zoom

Since we had nowhere to clamp, we drilled holes in each piece, and "stitched" them together. We used some mechanics wire. After the pieces cure, we remove the wire and give the area another coat of fiberglass. This will cover the holes and add some strength to the bonded area.
The LAZARUS Project: PART II

 Since we had nowhere to clamp, we drilled holes in each piece, and "stitched" them together. We used some mechanics wire. After the pieces cure, we remove the wire and give the area another coat of fiberglass. This will cover the holes and add some strength to the bonded area.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Vette Web,
Source Interlink Media
All rights reserved. WEB-041