Those of you with a yen for C4 tech are probably wondering what ever became of our Polo Green '96 coupe, which appeared poised last winter to take a giant leap toward dragstrip superstardom with the addition of Trick Flow's new Fast as Cast GenX head-and-cam package ("To Top It All Off," Feb.'10)? Unfortunately our enthusiasm for the project turned out not to be shared by members of the local Corvette-tuning community, no fewer than four of whom declined to take on the job of installing the parts after learning the age of the car.
Such is the virtual pariah status to which the LT1 engine has sunk in the years since its retirement. Outmoded, down on power, and needlessly complex, the powerplant that did so much to restore the Corvette's performance luster in the early '90s is now treated by many as the mechanical equivalent of an end-stage Ebola patient-messy, intractable, and to be avoided at all costs.
Although we had originally hoped to give him a respite from sorting out our project-car hassles, we ultimately turned to Greg Lovell, at AntiVenom in Seffner, Florida, to handle the job. Unlike many newcomers to the Vette-fettling field, Lovell has been chin deep in these cars for most of his adult life, so he's well versed in the numerous idiosyncrasies afflicting older, less-popular models. After a minimum of cajoling, he agreed to take on our installation and let us hang around to photograph the affair.
In the pages that follow, we'll recap the major components of the package, bring you up to date on some new supporting items, and provide an overview of the install. In an upcoming issue (soon-we promise!), we'll be back to put the newly revitalized car through its paces at the track and on the dyno.
Trick Flow Fast as Cast GenX...
Trick Flow Fast as Cast GenX head-and-cam package.
You'll recall that the chief...
You'll recall that the chief benefits of the Fast as Cast GenX heads include optimized port designs, a 21-degree valve orientation, CNC finishing in critical areas, and big, 2.02/1.60-inch valves.
A modest 54cc chamber preserves...
A modest 54cc chamber preserves the stock 10.4:1 compression ratio.
The camshaft is a TFS custom...
The camshaft is a TFS custom hydraulic roller with specs 0.530/0.530-inch lift, 219/227-degree duration, and a 113-degree lobe-separation angle) designed to blend outstanding overall performance with acceptable driving manners.
On installer Lovell's recommendation,...
On installer Lovell's recommendation, we had Summit send us a fresh harmonic balancer to complement the top-end package. This steel Super Damper from ATI (Summit PN ATI-917274) comes machined for OEM serpentine belts and exceeds SFI 18.1 safety specifications.
Since we were pulling the...
Since we were pulling the heads and intake off anyway, we decided to drop in a fresh set of TFS lifters (Summit PN TFS-21400002-16). While not mandatory on a low-mileage, roller-cammed car such as ours, this step is a worthwhile precaution given the relatively modest investment involved.
To clean up the engine bay...
To clean up the engine bay a bit, we obtained a set of EGR block-off plates from UMI Performance (UMI PN 2100). The plates are machined from 6061 aluminum and install easily with a dab of high-temp RTV sealant. (Note: This is not an emissions-legal modification.)
As you might imagine, a job...
As you might imagine, a job like this begins with a considerable amount of disassembly work, including the removal of the radiator...
...and intake manifold, as...
...and intake manifold, as well as the headers (or exhaust manifolds), OptiSpark unit, and pulley assemblies.
With most of the ancillary...
With most of the ancillary gear out of the way, we can get a good look at the oil-encrusted front cover. Though unpleasant to behold, this type of leakage isn't out of the ordinary on an LT1 engine.
Moving on to the engine valley,...
Moving on to the engine valley, installer Greg Lovell removes the lifter-retaining hardware...
...followed by the stock ...
...followed by the stock lifters.