With a better power-to-weight...
With a better power-to-weight ratio than a ZR1, Young's blown Z06 should have no trouble keeping up with its $107,000 stable mate.
One of Shakespeare's more controversial quotes involves a simple legal maneuver: "The first thing we do, let's kill all the lawyers" (Henry VI). The thing is, we don't run into a lot of car enthusiasts who are fans of Bill Shakespeare (Kill Bill might be more up their alley). Besides, some of our best friends are barristers, and we just came across one really sharp-eyed legal eagle by the name of Steven Young, the owner of the supercharged '08 Z06 shown here (plus a slew of other Vettes). He happens to be the corporate attorney for Magnuson Products, the maker of the car's high-tech windmill, and also is Chairman of the Board at the Petersen Automotive Museum, and a member of the National Corvette Museum.
Young's gigs actually sound like pretty good work-if you can get it. And anybody who has the moxie to bolt a blower on an LS7 is OK in our book. Having driven Young's righteous piece of machinery, we're frankly thinking of enrolling in law school. (On second thought, maybe we'll just watch a rerun of Legally Blonde instead.)
But we digress. A lot. Let's focus on the nuts and bolts of this setup. Magnuson has long employed the tried-and-true Roots-type supercharger, using rotors supplied by the Eaton Corporation. Originally designed in 1860 by the Roots brothers as an air pump with meshing lobes for use in blast furnaces, it eventually found its way onto an engine designed by Gottlieb Daimler in 1900.
"Alas, poor Yorick..." Hamlet, Act 5, Scene 1
That early configuration, though, is about as antiquated as the skull of Yorick unearthed by those two clowns in Hamlet. (By the way, Hamlet never said, ". . . I knew him well.")
The kit comes with everything...
The kit comes with everything you'll need to perform the job, including a set of upsized injectors and custom PCM programming (not shown).
Today's version has been substantially refined by Eaton in a number of significant ways, such as using four-lobe rotors on the TVS (Twin Vortices Series) Supercharger, among other changes. It also has a new twist-literally.
These twin four-lobe rotors now have a 160-degree helix shape (roughly similar to a DNA strand). The higher helix angle, along with improved geometry for the inlet and outlet ports, reduces pressure variations, resulting in a smoother discharge of air for higher efficiency over traditional Roots superchargers. With helical rotors and an axial inlet, the Magnuson supercharger can spin up to 14,000 rpm, thus reducing package size.
Another change is in the actual surface material of the rotors, called APC (Abradable Powder Coating), which both looks and feels like extra-fine, wet-or-dry black sandpaper.
"It's a self-honing coating to keep clearances at minimum," explains Magnuson's Bob Roese. This allows the rotor to "wear in" for improved sealing. In addition to these upgrades to the innards of the blower case, the intake ports have been enlarged and a "blowhole" added in the rotor configuration to reduce noise. Moreover, Magnuson adds its own special recipe of components to optimize Eaton's air pump for a particular automotive application.
"Eye of newt, and toe of frog..." Macbeth, Act 4, Scene 1
No witches' brew of arcane performance parts is needed here, though. It all comes down to a few essential items: a blower case, a custom intake manifold, bigger injectors, an intercooler, and a software modification in the engine computer. And one more thing: the whole shebang needs a slightly taller hood, in this case courtesy of RK Sport. Not counting the painting and swapping out of the hood, installation takes at least a day and a half, depending on your skill level (or your mechanic's).
The injectors are 60-lb/hr units, the same as on the ZR1 LS9. The performance software, provided by SCT, changes the injector pulse widths to compensate for the larger injectors, scales them for the addition of the boost when the bypass closes, and alters the timing maps to compensate for the additional air.
The blower case comes standard...
The blower case comes standard with a subtle black finish that could easily pass for OEM. Injectors are the same 60-lb/hr units used in the ZR1.
The four-lobe rotors on the...
The four-lobe rotors on the TVS supercharger feature a self-honing coating called APC. The coating allows the rotors to effectively machine their own ultra-precise fit within the blower case.
A batch of blower pulleys...
A batch of blower pulleys awaits packaging at Magnuson HQ in Ventura, California. The company currently offers supercharger kits for most C5 and C6 applications.