Breathless Performance Products
(954) 925-7725
www.breathlessperformance.com

Brief Description
Our Vortex Rammer kit replaces the restrictive, stock airbox assembly on your Corvette with a revolutionary air cleaner containing an internal vortex velocity stack. It obtains cool, pressurized air from the radiator cavity through your modified shroud. Air is forced through a sealed box and directly injected into your intake, lowering manifold-air temperatures by almost 30 degrees F.

Trademark Features
Our power duct replaces the stock air bridge between the throttle body and the MAF and increases the airflow to the motor by more than 40 percent. It's a one-piece unit, unlike typical two-piece seamed units, which have a tendency to crack along the seam. Our new power tube supports the MAF sensor and is optimized to increase airflow while being computer friendly. Dyno testing has shown up to 36 additional hp and 38 lb-ft at the flywheel. All materials and products are made in the USA to a high-quality standard.

Quote From Company
"Proven on the track and tested on the dyno to be the world's most-powerful ram-induction system."

CORVETTE APPLICATIONS:
C1 C2 C3 C4 C5 C6
  X X X

BBK Performance
(951) 296-1771
www.bbkperformance.com

Brief Description
BBK's cold-air induction systems for the Corvette are CAD-designed for optimum airflow and maximum performance, and utilize high-flow, washable cotton-element filters.

Trademark Features
All kits are vehicle specific and are designed as a direct bolt-on using simple hand tools. In addition, all kits are dyno tested with a 10-15hp improvement over stock. BBK offers a one-year warranty on all products.

Quote From Company
"BBK's cold-air intake systems can be installed in just minutes. They work excellently with other power adders, such as performance exhausts and throttle bodies."

CORVETTE APPLICATIONS:
C1 C2 C3 C4 C5 C6
  X X

Callaway Cars, Inc.
(860) 434-9002
www.callawaycars.com

Brief Description
Honker Cold Air Induction Systems consistently exhibit very high mass-airflow rates with a minimum of turbulence, allowing a greater volume of inlet air for increased power. A key element to the product is its unidirectional air path. The absence of abrupt changes in air direction, as found in other designs, facilitates air movement. From the outer surface of the air-filter element to the throttle body, the inlet air has a short, direct path.

Trademark Features
* CAD-designed main-duct shape and smooth inner-surface finish are engineered to maximize laminar flow
* Filter base positions filter element in OEM-designed, high-pressure area to allow access to cooler, denser inlet air from outside the engine compartment
* Duct and couplers manufactured with OEM-grade polymers, which are unaffected by severe underhood temperatures, lubricants, and cleaners
* Large, low-restriction, reusable panel-filter element features Callaway-specific double-lip seal to ensure air-tight sealing
* Compatible with all OEM engine management sensors
* Premium-quality hardware is used throughout for extended durability

Quote From Company
"Honker Cold Air Systems are used as original equipment in Callaway Corvettes and Callaway C16s."

CORVETTE APPLICATIONS:
C1 C2 C3 C4 C5 C6
  X X