C1 Corvette 9 Inch Rearend Kit Installation Photo

C1 Corvette 9 Inch Rearend Kit Installation

Prev Next

C1 Corvette Rearend - Straight And To The Point

This is a '59-'62 Corvette chassis with the upper traction arms (above the springs) in place. The arms and their brackets must be removed to install the kit. (The '53-'58 models have a spring stop on the outside of the frame that must be removed.) This is the point at which you'll want to measure and check the rear frame for previous damage. If you find any, the car may need to go to a frame shop for straightening. View Related Article

Chevrolet Corvette Research

Finding a fuel efficient automobile today is easier than ever. Check out the Chevrolet Corvette buyer's guide providing information on car specs, reviews and fuel economy. Fuel efficiency is important and the 2010 Corvette with a 12v power outlet: front capacity gets 19 mpg, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro.