Getting a look at Jay Leno's "garage" (the term doesn't do these digs justice) is nothing less than a feast for the senses, sure to impress on at least two fronts. One is the sheer quantity of vehicles the Tonight Show host owns; the other is the incredible diversity of his collection. There aren't many places you'd see-museums included-a McLaren F1, a Lamborghini Countach, an A/C Cobra sporting a 427 "Cammer" mill, and a Hudson Hornet, all in one place. And that's just scratching the surface, leaving out an equally impressive motorcycle collection, which includes everything from several Vincent Back Shadows to a jet turbine powered two-wheeler. We're sure, however, that you get the point.
A couple of years ago, when he decided to add a Corvette to his stable after driving the pace car at the '98 Indy 500, VETTE was lucky enough to be invited along for a look as Jay had Corvette Mike (1133 N. Tustin Ave., Dept. VM, Anaheim, CA 92807; 800/327-8388) fit his '99 coupe with a few goodies ("Jay Leno's First Corvette," July '00). It didn't take all that long for Leno to get the itch for another Corvette-this creature, however, would have an entirely different personality than that first, close-to-stock vehicle.
"From the sound of things," recalls Jon Moss, Manager of GM Special Vehicles, "Jay hadn't been in a new Corvette before getting his first one. He kept saying, 'This is a nice car.'" On the other hand, as Moss remembers it, Leno wanted to "enhance" the vehicle. "He also," Moss continued, "wanted something no one else had. So, we 'enhanced' Jay's car." A call was made to Wheel to Wheel, the prototype shop responsible for such Corvette exotica as Chevrolet's Tiger Shark concept vehicle, which made it's public debut on VETTE's December '01 cover and was featured in the story "What If..."
The Michigan-based crew (570 Executive Dr., Dept. VM, Troy, MI 48083; 248/588-5588) started with a factory spec Millenium Yellow '02 Z06, and proceeded to give it a Wheel to Wheel style reworking. The black leather interior was treated to a few goodies, including a custom console lid, carbon fiber sill plates, and Wheel to Wheel's aluminum throttle pedal and dead pedal.
Things get much more interesting when it comes to the body. This Z06 gained a whole new look by way of the Wheel to Wheel's Design Styling Package. The package includes a new front fascia, front chin spoiler, and an air-extracting hood. The body redo is capped off with a new rear fascia, complete with production European rear taillight assemblies. If this Vette's new wardrobe looks familiar, there's a reason for that: it's the same striking body treatment that adorned the aforementioned Tiger Shark.
Whereas Chevy's SuperVette wears "427" hood badges and "SUPERCHARGED" on its fenders (as is appropriate for a C5 powered by a supercharged, 427ci stroker LS6), Mr. Leno's new ride wears standard-looking "Z06" badges on its sides...which are only standard looking for as long as it takes to notice that the horsepower rating part of the logo shows 514 hp as opposed to a "regular" '02 Z06's 405 ponies.
All this grunt comes from a stoutly built Wheel to Wheel LS6. W2W started with a fresh aluminum LS6 cylinder block, and fitted it with new 4.0-inch bore iron sleeves. A Lunati 4.0-inch stroke forged crankshaft was fitted in the new block, along with Oliver 6.125-inch ultra-light connecting rods. CP Pistons forged mild-dome slugs wearing Speed Pro fitted piston rings were stuffed into the cylinders, and of course the rotating assembly was properly balanced and fitted. The result is a perfectly square powerplant (4.0x4.0-inch bore and stroke) displacing 6.6L (402 ci) and sporting a 11.2:1 compression ratio.
Howie Markowitz of American...
Howie Markowitz of American Big Bike (9040 Sunset Blvd. Ste. 203, Dept. VM, West Hollywood, CA 90069; 310/550-1579) presented Jay with some custom billet accessories for his new Vette.
"Whadda ya' mean your car...
"Whadda ya' mean your car doesn't have Active Handling? It's right there!" Jay was happy to instruct Corvette Mike Vietro on the finer points of Z06 control panels.